川源水泵_离心泵卧式直接式GMS
作者:xryjd | 时间:2019-07-18 17:10:46

川源水泵离心泵

GMS卧式直接式离心泵:

来自川源(中国)机械有限公司。我司专业做各类抽水泵、供水机组、废水处理设备、自吸泵、管道泵、排污泵、潜水泵、离心泵、耐腐蚀离心泵、不锈钢自吸泵等,欢迎广大客户通过QQ、微信、在线留言以及电话联系我们。

 

用途

■暖通空调冷热水循环系统

■设备配套

■高楼给水

■一般工业用水

■消防给水

■土木施工用水

■污水处理设备

■农业灌溉用水

■锅炉给水

本文由鑫瑞源机电转载发布,本公司代理川源泵浦河见泵浦锦田泵浦;专业销售管道泵离心泵自吸泵污水泵酸碱泵潜水泵抽水泵预制泵站等。欢迎访问官网查询具体信息。

 

Application

Air-condition cold or hot

water circulation

Can be used together with

equipment

Water-supplying system of

apartment building

Industrial water supply

Fire-fighting water system

Construction engineering

water supply

Waste water treatment

Farm water irrigation

Boiler water supply

 

特点

■叶轮采用优秀的水力模型设计,具有极好的动静平衡,性能稳定。

■采用特殊结构设计,泵轴向总长度比传统单吸泵显著缩短,以利于提高运转平稳性,降低噪音。

■采用进口轴承,振动小,噪音低。

■单吸、单级卧式离心泵,闭式叶轮。

■同轴直接式构造,效率高,体积小,重量轻,安装保养容易。

■采用机械密封,不损轴心,不漏水,使用寿命长。

■可根据要求采用不同材质。(本型录为铸铁材质,若选用不锈钢材质,则尺寸及重量另行提供。)

 

 

Features

The optimal hydraulic model is used for impeller, the pump is of an utmost dynamic-static balance and reliable performance.

Special structural design, the total length of the shaftsignificantly shorter than the traditional single-suction pump, in order to improve the operation stability, lower

noise.

The pump which is supported by imported bearing, runs at little vibration and low noise.

Singl-stage single-suction horizontal centrifugal pump, closed impeller .

Coaxial volute structure, high efficiency, small volume, light weight, easy installation and maintenance.

Mechanical seal, no damage to shaft, no leakage, long duration.

Materials can be selected according to the requirement of the customer. (Material of the pump model in the castalog is cast iron. The size and weight of the pump made of stainless steel can be provided separately.)