CP 潜水污泥泵
作者:xryjd | 时间:2019-07-18 17:06:40

沉水泵

CP沉水式污物(泥)泵

CP submersible solid handling pump

 

 

用途                           

■废水扬升站                                           

■都市废水处理厂                                      

■一楼化粪池排水系统                                  

■农畜牧业废水处理系统                

■医院、学校、社区等生活废水处理系统

■食品、造纸、采矿、纺织、皮革、化学工厂等工

■业之水处理系统

■净水处理系统

 

 

 

Application

Wastewater lift station.

Municipal wastewater treatment plant.

Building wastewater treatment system.

Livestock animal nusbardy wastewater treatment system.

Hospital, school, community, etc. wastewater

treatment system.

Food, paper, mining, textile, leather, chemical industry, etc.

wastewater treatment system.

Water purification system.

 

 

特点 

■电动机

鼠笼式感应电动机,F级绝缘,防护等级IP68

不阻塞叶轮

采用最新无堵塞理论设计的叶轮,流道宽大,水

流畅通,污物容易通过,效率高。

所有叶轮均经动、静平衡校正,最大程度的减少

了振动和噪音,运转平稳,寿命长。

■机械密封

机械密封的作用是阻绝抽送介质与电动机部分接

触,双机械密封串联相互独立工作,为电动机提

供双重保护。

自动着脱装置(选用配备)

使泵浦安装、保养、修护迅速容易,毋须先清除

桶槽污水。

■测漏检知器

在油室内加装测漏检知器,可检测因密封不良或

机械密封损坏造成之洩漏(<15kW选用配备,≥15kW

标准配备)。

大功率水泵在接线盒和电机腔内加装测漏检知器,

可对接线盒和电机腔内的洩漏发出报警信号,使

控制系统对泵实施保护(非标准配备,132kW

选配)。

■过热保护器

在电动机中加装过热保护器,对过载、温升等状

况自动进行检测,避免由于电动机过热造成电机

烧毁(<15kW选用配备,≥15kW标准配备)。

在轴承中加装过热保护器,当轴承温度升至断开

温度时,保护器自动切断电源,起到保护轴承的

作用(非标准配备,18.5kW可选配)

■水冷夹套(选用配备)

泵工作时利用泵腔内压力使液体连续进入水冷夹

套与电动机外壳的空间以带走电动机产生的热量,

从而保证水泵在低水位正常工作(18.5kW可选配)。

 

 

 

Features

Motor

Squirrel-cage, induction motors are F class insulation, motor

protection grade is IP68.

Mechanical seal

Non-clog impeller

Well statically & dynamically balanced Non-Clog impeller is

designed to allow sizable spherical solids to pass the flow

passage easily without clogging. It adopts rigorous technics

so that vibration and noise can be farthest reduced.

Mechanical seal

The mechanical seals protect the motor from contacting the

pumping liquids. Two seals are in series with each other and

individually work to provide the motor with a dual protection.

Auto-setter (options)

To allow pump for easy installation, maintenance & reparation,

as it is no need to empty the tank first.

Leakage detector

Built-in leakage detector in the oil chamber can detect leakage

from the damage of the mechanical seal. (Less than 15 kW

options, No less than 15kW standard).

Built-in leakage detector in the wiring box and motor cavity of

large power pumps can check if a leakage in it. The leakage

detector offers pump an automatic protection (Not standard,

No less than 132 kW options)

Heat-protector

Built-in heat protector in motor, can prevent the motor from

burning out, overload & overheating. (Less than 15 kW options,

No less than 15 kW standard).

Built-in heat protector in bearing, when the bearing is abnormal and the temperature rises to disconneting temperature,

the protector automatically cut off power supply to protect

the bearing. (Not standard, no less than 18.5 kW options).

Cooling house (options)

Pumps make use of inner pressure of pump cavity to make

liquid continully entering in space between cooling house

and motor outer, to take away the heat of the motor. to make

sure the regular work of the pump in low water level (No less

than 18.5 kW options).

本文由鑫瑞源机电转载发布,本公司代理川源泵浦河见泵浦锦田泵浦;专业销售管道泵离心泵自吸泵污水泵酸碱泵潜水泵抽水泵预制泵站等。欢迎访问官网查询具体信息。